September 1, 2009

This kit can repair many GE (Regal-Beloit) ECM motor modules that have been damaged by voltage problems and power surges.

Requires the use of a soldering gun and rosin-core solder.

(Click image for more details.)

4 large Alligator Jumper Wires for use on motor circuits.

• 24" Length
• 4 Wires in 4 Colors
• 14 AWG (30A) Wire
• Velcro Tie/Hang Strap
• Soldered, not just crimped
• Heavy gauge, resealable bag

(Click image for more details.)

10 small Alligator Jumper Wires for use on control circuits.

• 36" Length
• 10 Wires in 5 Colors
• 22 AWG (6A) Wire
• Velcro Tie/Hang Strap
• Soldered, not just crimped
• Heavy gauge, resealable bag

(Click image for more details.)

ICM175 Timer

Features:

• 18 - 240 VAC
• Designed to bypass a low pressure switch or other device during startup
• Ideal for low ambient startups
• Key component for "winter start" kits
• Helps to reduce nuisance lockouts
• Universal AC voltage operation
• Knob-adjustable time delays
• UL Approval: E53944

(Click image for more details.)

This plug and harness fits the common GE/Regal-Beloit/GENTEQ Series 2.0, 2.3, 2.5 and 3.0 motors. It has a 5-pin motor plug (1 row of 5 pins). The motors can be either 120V or 240V, the plug/harness allows you to test any voltage motor with EITHER 120V or 240V on your bench.

(Click image for more details.)

It’s possible that your main harness might get cut or damaged by a blower — it’s easily replaced. Or use this as an EXTENSION!

(Click image for more details.)

Safe-T-Switch

The Safe-T-Switch model SS3 detects rising water in A/C condensate drain pans and interrupts the thermostat circuit to shut off the unit before overflows and flooding occur. The model SS3 is designed to install in auxiliary (safety) drain pans. The included stainless steel clip snaps easily in place on most pan rims and holds firmly. Compact footprint fits well in tight spaces.

Safe-T-Switch model SS3 incorporates sealed, waterproof reed/magnet float switch technology for long term, reliable performance with no exposed electrical contacts to corrode, short out, or fall off. Included 4 ft., 18 AWG lead wires require one electrical connection during installation.

Safe-T-Switch is UL listed and complies with most applicable building codes. Safe-T-Switch has been tested for 6000 cycles at 1.25 amps in its assembled form and listed for use in a 24 volt circuit by Underwriters Laboratories. IAPMO and City of Los Angeles approval are pending at this time.

24 VAC, 1.25 amp GP switching current (tested and listed by UL at 6000 cycles - inductive load). Reed component device is separately UL recognized at 2.5 amps maximum carry current.

Package includes stainless steel clip/bracket and 4 ft., 18 AWG lead wires.

(Click image for more details.)

Four pack contents:
Orange - 65
Yellow - 45
Red - 30
Blue - 100

• Sure-grip (Standard type) ribs improve gripping ability and comfort
• Exceptional design makes twisting easier, ensuring proper installation - especially in tight spaces
• Deep surface ridges provide better grip
• Threaded funnel entry guides the wires into the connector easily
• Fixed, precise square wire spring provides secure gripping of conductors
• Deep skirt entry provides protection from flashover and shorts
• Flame retardant UL94V-2 thermoplastic shell provides excellent electrical insulation
• Temperature rating 105° C (221° F)
• Pre-twisting of wire is not necessary
• 1000 volt maximum in fixtures and signs

(Click image for more details.)

Use this product with standard 24V drain overflow cutoff switches (not included).
Features:

• Bright red LED lights when condensate drain overflow switch has been activated
• Snap-in holder locks into standard 1/4" hole
• Easy two wire hookup works with all standard drain overflow switches

(Click image for more details.)

Foot mount, compact, open construction transformers are less than 2 1/4" in height. This makes them ideal as replacements within existing equipment. Provide power source for control circuit for air conditioning, heating, or refrigeration systems.

Features:

• Primary voltage: 120/208/240
• Secondary voltage: 24
• UL 1585 recognized
• Low heat rise
• Primary color coded leads
• Secondary color coded leads, or 1/4" male quick connects
• Foot-mount
• Made in USA

(Click image for more details.)

These contactors feature a compact, efficient design with a low VA coil and straight-through wiring. These economically priced, UL recognized, CSA certified, ampere rated devices are well suited for use in heating/air conditioning, data processing, and food service applications.

Specifications:

• Class B magnet coil
• Double break contacts
• Dual 1/4" quick connect coil terminals
• 10-32 binding head screws and dual 1/4" quick connects on power terminals
• 10 - 16 AWG terminal wire range

(Click image for more details.)

Quantity: 4 fuseholders with crimp terminals and 4 fuses

This kit contains the necessary parts to replace (or install original) the fuse protection for transformer outputs (and other devices) in HVAC systems. Protects transformer and other equipment from damage.

(Click image for more details.)

These shunt/shorting clips are used to set options on furnace control boards, defrost controls, etc. They are nearly impossible to find if dropped in insulation, grass, or carpet.

Get a pack NOW and save a trip!

(Click image for more details.)

Includes 1 set of 3 terminals, wires, and connectors

This compressor terminal repair kit features:

• Terminals are high temperature soldered, not just crimped
• Heavy duty 10AWG wire
• Special terminals allow clearance for compressor posts and lay flat under the safety cover

(Click image for more details.)

Convenient package of 2 hard to find GMQ 3.2A fuses. Rated to 300 VAC.

(Click image for more details.)

Convenient package of 25 glass AGC 1A fuses. Rated to 250VAC.

(Click image for more details.)

Convenient package of 25 glass AGC 2A fuses. Rated to 250VAC.

(Click image for more details.)

Convenient package of 25 glass AGC 3A fuses. Rated to 250VAC.

(Click image for more details.)

This 5A 24V circuit breaker is found on high-end transformers. The kit includes wires and pre-installed terminals that allow you to easily plug it into the connectors where a plastic type ATO/C fuse was.

(Click image for more details.)

Convenient package of 25 glass AGC 10A fuses. Rated to 250VAC.

(Click image for more details.)

Convenient package of 25 plastic MINI 30A fuses.

(Click image for more details.)

Convenient package of 24 assorted plastic MINI fuses.
Includes:

• 3A (4)
• 5A (4)
• 10A (4)
• 15A (4)
• 20A (4)
• 30A (4)

(Click image for more details.)

Convenient package of 25 plastic MINI 10A fuses.

(Click image for more details.)

Convenient package of 25 plastic MINI 20A fuses.

(Click image for more details.)

Convenient package of 25 glass AGC 5A fuses. Rated to 250VAC.

(Click image for more details.)