September 1, 2009

This device protects your expensive ECM motors from transient, surge, lightning, and spike voltages. This plug-in device is fast and convenient.

(Click image for more details.)

This tests and indicates the following for GE (Regal-Beloit) ECM motors:

• Input power level
• Power filter/choke
• Wiring configuration

Full instructions are included.

(Click image for more details.)

Educational DVD's for technician training. Includes:

• Understanding ECM Motors and Systems
• Troubleshooting ECM Motors and Systems

(Click image for more details.)

The ShortPro Tool helps you find 24V system shorts by acting as an auto-resetting circuit breaker.

The ShortPro Tool's red LED lights brightly when it trips, telling you a short exists on that branch. When the short is removed, the ShortPro Tool automatically resets.

The ShortPro Tool is small and light enough to fit in your shirt pocket and save you trips back to the truck.

(Click image for more details.)

This Adapter fits the EVERGREEN IM motors. (It does not work with the Evergreen AH motor, which is no longer in production).

(Click image for more details.)

This Adapter fits the ECM 142 Multi-Speed Signal Controlled Condensing Unit Fan Motors

(Click image for more details.)

This Adapter fits the GE X-13 Motors and many popular "X-Motor" motors. It has a 5-position plug that fits what look like 5 male quick-connects on the motor.

(Click image for more details.)

This Adapter fits the GENTEQ 3.0 Series motors. It has a 4-pin motor plug.

(Click image for more details.)

This Adapter fits the common GE/Regal-Beloit Series 2.0 and 2.3 motors. It has a 16-pin motor plug (2 rows of 8 pins). This adapter is included with the UZ-1.

(Click image for more details.)

This adapter allows the technician to connect a Variable Speed Zebra to certain Coleman, York, and Lennox furnaces/air handlers which contain ECM (variable speed) drives.

(Click image for more details.)

LCD Digital Thermometer. Can be surface or panel mounted. Fahrenheit or Celsius display.

(Click image for more details.)

LED Flashlight Kit

Includes pocket clip, visor clip, and headband for hands-free use!

State-of-the-art LED products are nearly unbreakable, won't burn out, and significantly extend battery life. Quality, efficiency, and durability make TerraLUX the professional's choice.

Features:

• Electronically regulated 1W LED provides constant light output, even when batteries are low
• Lightweight, high strength aircraft grade aluminum case
• Twist On/Off or press to flash or signal
• Water resistant

(Click image for more details.)

The Zebra'Dapter is a fused power tap cordset which provides a significantly safer way to use 120VAC power to test:

• Motors
• Blowers
• Other Components and Systems

The lighted 120VAC plug confirms available voltage and the inline fuse makes your jobsite safer.

(Click image for more details.)

This kit contains the necessary parts to protect one furnace/air handler and one outdoor unit from surges, spikes, and transients on the line voltage supply.

(Click image for more details.)

Inline or Plugged
Safe-T-Switch

Detect down stream clogs in condensate drains and interrupt the thermostat circuit to shut off the unit before flooding occurs. Designed for use in primary drain lines or primary pan auxiliary outlets to stop the unit before water reaches the air handler insulation and safety pan.

Can be installed vertically or horizontally, inline in primary drains, or plugged on auxiliary pan outlets. Can be installed sloped or plumb. Comes with 4 ft, 18AWG wires, plug, and 3/4" bushing.

(Click image for more details.)

ICM301 Heat Pump Defrost Timer
Direct replacement for Rheem 47-21776-06

Features:

• Time and temperature defrost
• Sensor input for defrost terminate
• Time and temperature terminate
• 10 minute fixed defrost time
• Pin-selectable intervals: 30/60/90 min.
• Test pins reduce test time by 256x
• Hold input accumulates actual compressor run times, regardless of disc thermostat condition prior to defrost

(Click image for more details.)

The Zebra'Dapter is a fused power tap cordset which provides a significantly safer way to obtain 120VAC power from:

• Condensing Units
• Attics & HVAC Closets
• New Construction Sites

The lighted 120VAC receptacle shows relative voltage and the inline fuse makes your jobsite safer.

(Click image for more details.)

8 medium Alligator Jumper Wires for use on motor circuits.

• 24" Length
• 8 Wires in 8 Colors
• 18 AWG (15A) Wire
• Velcro Tie/Hang Strap
• Soldered, not just crimped
• Heavy gauge, resealable bag

(Click image for more details.)

ICM255 - Fan Blower Control Board

Features:

• Low cost open board design
• High power, relay output
• Dual function fan delay timer
• Controls the circulating fan in heat pump, A/C, and forced air systems
• OFF delay purges ducts of residual air
• ON delay allows air to reach the proper comfort level prior to energizing the fan

(Click image for more details.)

This plug and harness fits all X-Motors, X-13 Motors, and the early Evergreen motors (Evergreen "AH" series). It appears to be a 5-position connector, but actually has one position blocked off.

(Click image for more details.)

This plug and harness fits the newest style of Evergreen motor, called the Evergreen "IM". It is a 4-position connector.

(Click image for more details.)

Preplugged for Auxiliary Drains
Safe-T-Switch

Detect down stream clogs in condensate drains and interrupt the thermostat circuit to shut off the unit before flooding occurs. Designed for use in primary drain lines or primary pan auxiliary outlets to stop the unit before water reaches the air handler insulation and safety pan.

Can be installed vertically or horizontally, inline in primary drains, or plugged on auxiliary pan outlets. Can be installed sloped or plumb. Comes with 4 ft, 18AWG wires, plug, and 3/4" bushing.

(Click image for more details.)

A rugged, protective case (10.5" x 7") that protects your UZ-1, your Adapters, and Motor Power Plugs from loss or damage.

(Click image for more details.)

Replacement 5-pin Power Harness for GE Variable Speed Motors (except the X-13 motor). Used for either 120V or 240V motors. Instructions included.

(Click image for more details.)

MARS end bell transformers provide enclosures for the primary and secondary windings and multi-mount models offer three mounting options-foot, plate, or conduit mount. They provide the power source for control circuits for air conditioning, heating, or refrigeration systems.

Features:

• Primary voltage: 120 or 208/240
• Secondary voltage: 24
• 40 VA
• 50/60 Hz
• Low heat rise
• Primary color coated leads
• Secondary color coded leads, or screw terminals
• Multi-mount or plate mount
• Made in USA

(Click image for more details.)