September 1, 2009

Features:

• Infrared sensor - Fast, accurate, and versatile. Long life expectancy
• Superior sensitivity - Toggle between three levels of sensitivity down to 0.1 oz/year
• Fast warm up - Only 30 seconds between start up and detecting
• Automatic re-calibration - Finds leaks even with refrigerant in the air surrounding the leak
• Peak hold - Peak reading indicator with manual reset to clear
• Moisture blocking filter keeps water and other contaminants out
• Easy filter replacement
• Ten extra filters included
• Rubberized case
• Works with all CFC, HFC, and HCFC refrigerants
• Fast acting
• Bright and clear LED bar graph and beeper indication
• Entire sensor arm is non-conductive
• Low battery LED
• Auto-off after 10 minutes
• 8 hour battery life to last the whole work day
• Rechargeable lithium ion polymer battery
• Wall charger included
• Car charger included

(Click image for more details.)

Portable standalone charging meter designed with the HVAC/R technician in mind. The SSX34 is capable of taking liquid and suction line temperature, pressure, superheat, and subcooling. It comes with a rugged rubber boot and a magnetic hanger to make the technicians job easier.

Features:

• Measures superheat and subcooling
• Works for R22, R410A, R134A, and R404A
• Dual display (shows pressure and pipe temperature, superheat, or subcooling)
• Vacuum to 29" Hg
• Zero adjust for field pressure calibration
• Temperature calibration port on face for field temperature calibration
• "T" fitting allows the user to charge the system to superheat and subcooling without disconnecting anything
• Magnetic hanging strap

(Click image for more details.)

A Manual Ranger Designed for HVAC/R Technicians
More real world capability in one meter

Non-contact voltage:

• Loud beeper and bright LED indicate the NCV tab is near AC voltages greater than 24V

Temperature:

• Thermocouple plugs in directly for accurate readings, even in fast changing environments

Microamps:

• For flame rectifier diode tests

Capacitance:

• For motor-run and motor-start capacitors

And more:

• High voltage indicator you can't miss -- both LED and beeper turn on to indicate you've touched a potentially dangerous voltage
• Continuity indicated by LED and beeper
• MAX hold automatically holds reading so you can look at the meter after you've disconnected
• Low ohm ranges for motor windings and mid range for thermistors
• Amps AC resolution to 0.01A for heat anticipator circuit (20A range). Up to 200AAC with 0.1V resolution (200A range)
• VDC up to 0.01V resolution (20V range)
• Auto-power off to extend battery life

Test leads solutions:

• Probe storage in the back. Just snap them in.
• Single test lead holder for easy and safe voltage testing.
• Silicone test leads remain flexible in cold weather, withstand caustic chemicals, and work well in temperatures that will melt vinyl leads.
• Convenient lead storage. Wrap test leads through clamp to keep wires out of the way. You can even leave them right there when you test amps.

(Click image for more details.)

The SIG1 thermometer is a low cost, stand alone non-contact infrared thermometer. Simply aim the thermometer at the target and pull the "trigger" to display surface temperature. The temperature measured will be the average of all the temperatures in the field of view. The closer you are to the target, the smaller the area. The further away, the larger the area measured. The infrared temperature measurement is fast and easy. It works best for fast readings, relative readings (one to another or the same one at different times), or temperature readings of hard to reach places.

(Click image for more details.)